NEVER Pay a Diagnostic Fee Again!*


Alamo Austin Air’s Annual Preventative Maintenance Program keeps your HVAC System running at optimal performance year-round.

We perform our remarkable 20-Point Air Conditioning Tune-Up to reduce energy usage in the summer while keeping you cool and greatly reducing the chances of unexpected failures during our blistering 100+ degree days.

We also include and perform a top of the line 31-Point Heating Tune-Up for safe & reliable heating usage all winter!

(31-Point Heating Tune-Up – QUALIFIES FOR A $40.00 REBATE FROM TEXAS GAS)



Our 20 Point Air Conditioning Tune-Up in the summer includes:

  1. Check Thermostat
  2. Flush condensate drains to protect against overflow*
  3. Inspect indoor evaporator coil, if accessible
  4. Evaluate condition of air filters and other indoor air quality accessories
  5. Clean the outdoor condenser coil and remove debris from inside unit
  6. Visual contactor points inspection and ohm out coil
  7. Check start/run capacitors microfarad readings
  8. Visual Inspecting for refrigerant leaks
  9. Inspect and tighten all electrical connections
  10. Check blower motor start up and run amperage for proper function
  11. Check condenser fan motor start up and run amperage for proper function
  12. Check compressor start up and run amperage for proper function
  13. Check Freon pressures
  14. Check superheat
  15. Check subcooling
  16. Check cooling temperature drop across evaporator coil
  17. Check static pressure
  18. Visual External Duct Inspection
  19. Provide recommendations for keeping system running at peak efficiency
  20. Provide customer with results

Our 31 Point Heating Tune-Up in the winter includes:

  1. Perform Carbon Monoxide Test upon entry / exit
  2. Check Thermostat contact & heat anticipator
  3. Check Air Filtration System
  4. Clean Flame sensor
  5. Ohm out ignitor
  6. Inspect and tighten electrical connections
  7. Check Equipment and Ventilation Space
  8. Check Flue and Venting
  9. Check flame baffles
  10. Check Pilot Safety/Thermocouple/ Spark Ignition
  11. Check safety interlock switch
  12. Check Gas Input Pressure
  13. Clean and Check Gas Burners
  14. Clean and Check Pilot and Pilot Tube
  15. Inspect Gas Valve and Piping for leaks
  16. Inspect Combustion Chamber entry point for blockages or combustible materials
  17. Set Manifold Gas Outlet Pressure
  18. Set Burner Air Adjustment if applicable
  19. Verify flame sensor microamp reading within manufacture specs
  20. Check Fan Control
  21. Check inducer motor static pressure and vacuum tubing
  22. Check inducer motor run amperage
  23. Check blower motor start up and run amperage for proper function
  24. Lubricate blower motor if bearings are not sealed
  25. Check Temperature Rise across heat exchanger
  26. Check Limit Control above recorded heat rise
  27. Verify proper Voltage while under full load
  28. Check Static Pressure across blower
  29. Visual Duct Inspection
  30. Make Final Operation Check from thermostat
  31. Provide Customer with Results

*Never Pay A Diagnostic Fee Again (Gold PMP Only)
No Diagnostic fee offer valid only when you have an active GOLD Preventative Maintenance Program

*FREE Refrigerant (Gold PMP Only)
Receive up to 1lb of R410A Refrigerant (a $59 value) OR 1/2lb of R22 each year we service your air conditioner

Priority Service Guaranteed (Both Plans)
Means you receive service the same day if you call before noon.

Silver PMP Receives: Full 10% Discount OFF Retail Prices
Gold PMP Receives: Full 15% Discount OFF Retail Prices

Please Note: This offer does not warranty against condensate blockages or water damage cause by blockages


Need to reach us immediately?

Call (512) 736-0145 


Regulated by The Texas Department of Licensing and Regulation. P.O. Box 12157, Austin, Texas 78711, 1-800-803-9202, 512-463-6599; website: www.license.state.tx
Alamo Austin Air Conditioning and Heating, 9802 Willers Way, Austin, Texas 78748